Ventura County · cost guide
Deck & patio prices in Ventura County: 2026 ranges
A deck & patio in Ventura County costs $29–$68 per sq ft for deck and $13–$42 per sq ft for patio, with a typical mid-size deck or patio running $10k–$27k at the county average. Small projects start around $4k; large or high-end work can reach $58k or more.
As of 2026, Ventura County runs about 5% above the LA County baseline due to Coastal Commission review west of the 101, Conejo Valley HOA standards, and wildfire-zone building rules.
Updated
Deck & Patio Cost by Size — Ventura County Average
County-average ranges (1.05× LA County baseline). Individual cities vary — see the table below.
| Size | Type | Range | Low | High |
|---|---|---|---|---|
| Small | Patio or small deck | 100–200 sq ft | $4k | $11k |
| Medium | Deck or covered patio | 250–450 sq ft | $10k | $27k |
| Large | Multi-level or pergola + patio | 500+ sq ft | $23k | $58k |
Deck & Patio Cost by City in Ventura County
Every city in Ventura County, sorted alphabetically. Totals reflect each city's local cost multiplier. Cities in color have full project-specific pages.
| City | Small | Medium | Large |
|---|---|---|---|
| Camarillo | $4k–$11k | $10k–$26k | $23k–$57k |
| Fillmore | $3k–$9k | $8k–$23k | $20k–$50k |
| Moorpark | $4k–$10k | $9k–$26k | $23k–$56k |
| Ojai | $4k–$11k | $10k–$28k | $24k–$61k |
| Oxnard | $4k–$10k | $9k–$24k | $21k–$53k |
| Port Hueneme | $4k–$10k | $9k–$24k | $21k–$51k |
| Santa Paula | $3k–$9k | $8k–$23k | $20k–$50k |
| Simi Valley | $4k–$10k | $9k–$25k | $22k–$55k |
| Thousand Oaks | $4k–$11k | $10k–$28k | $25k–$62k |
| Ventura | $4k–$10k | $9k–$26k | $23k–$56k |
Want an exact deck & patio price for your home?
Skip the averages. Get two or three real bids from licensed builders in Ventura County.
What Affects Deck & Patio Cost in Ventura County?
- Material (concrete vs pavers vs composite deck).
- Permit (decks over 30" need one).
- Cover or pergola.
- Drainage.
- Hillside / sloped site.
- Ventura County market dynamics: Coastal Commission review west of the 101, Conejo Valley HOA standards, and wildfire-zone building rules, which shifts deck & patio totals about 5% above the LA County baseline.
- City variation within Ventura County: coastal and hillside cities can run 15–30% above the county mid-point, while inland labor markets price 10–20% below.
Deck & Patio Sub-Type Comparisons
Concrete Patio vs Paver Patio
Concrete patios are the cheapest hard surface but crack; pavers allow individual repair and add resale appeal.
Composite Deck vs Wood Deck
Composite (Trex/TimberTech) is maintenance-free for 25+ years; pressure-treated wood is cheaper but needs re-staining every 2–3 years.
How to Get the Best Price on a Deck & Patio in Ventura County
- Get line-itemized bids from two or three builders on the same scope; Ventura County deck & patio pricing commonly varies 10–25% between contractors.
- Compare bids from contractors based in multiple Ventura County cities; inland-based crews servicing coastal jobs often beat coastal-based pricing.
- Bid in shoulder seasons (Jan–Mar or Sep–Oct) when Ventura County contractor schedules are open and rush premiums disappear.
- Verify CSLB license, insurance, and bond before paying any deposit. California caps deposits at $1,000 or 10% of contract, whichever is less.
What is a deck & patio?
A deck or patio project builds an outdoor living surface: a raised wood or composite deck, or a ground-level patio of concrete, pavers or stone, often with a cover or pergola.
How to get an accurate price
- 1.Write down the scope: size, any layout changes, the finish level, and who supplies fixtures and materials.
- 2.Get bids from two or three licensed builders who work in Ventura County, all pricing that same deck & patio scope.
- 3.Line the bids up item by item. Check allowances, permits, exclusions, and whether overhead and profit are shown.
- 4.Before any deposit, check each builder's CSLB license and insurance. As of 2026, California caps a home improvement down payment at $1,000 or 10% of the contract, whichever is less, according to the Contractors State License Board.
Already have a bid? Grade it in two minutes or read how to compare quotes.
Questions about Deck & Patio in Ventura County
How much does a deck & patio cost in Ventura County?
A deck & patio in Ventura County costs $4k–$58k, with a typical mid-size deck or patio running $10k–$27k at the county average.
Where is deck & patio cheapest in Ventura County?
Within Ventura County, inland and value-tier cities price deck & patio jobs 10–25% below the county average, while coastal and luxury-tier cities can run 20–35% above. See the city-by-city table below for exact totals.
Do I need a permit for a deck & patio in Ventura County?
Yes for most scopes — the city building department (Ventura, Oxnard, Thousand Oaks, etc.) or Ventura County Building & Safety for unincorporated parcels requires permits any time you move plumbing, gas, electrical, or change structure. Like-for-like cosmetic refreshes generally don't.
Keep exploring
Compare deck & patio costs across Ventura County, or browse other projects and guides.
More Ventura County cost guides
Deck & Patio by city
Get Matched with Licensed Ventura County Contractors
Tell us about your deck & patio and we'll line up two or three licensed builders anywhere in Ventura County.