--- title: "Deck & Patio Cost in Encino (2026) | Keystone Connect" description: "Deck & patio in Encino, CA: $34–$78 per sq ft for deck and $14–$48 per sq ft for patio. Mid-size: $11k–$30k. Free vetted bids." url: https://keystoneconnect.us/cities/encino/deck-patio updated: 2026-10-27 --- Encino, CA · San Fernando Valley, West # Deck & patio prices in Encino, CA: 2026 ranges A deck & patio in Encino costs $34–$78 per sq ft for deck and $14–$48 per sq ft for patio, with a typical mid-size deck or patio running $11k–$30k. Small projects start around **$4k**; large or high-end work can reach **$66k** or more. As of 2026, costs in Encino run about 20% above the LA County baseline due to large-lot and hillside homes south of Ventura Blvd. Updated October 2026 Get matchedCost by size Cost (Deck) per sq ft $34–$78 per sq ft Cost (Patio) per sq ft $14–$48 per sq ft ## Deck & Patio Cost by Size in Encino Totals adjusted for the Encino market (1.20× LA County baseline). Ranges include labor, materials, permits, and contractor overhead. Deck & Patio cost by size in Encino, CA | Size | Type | Range | Low | High | | --- | --- | --- | --- | --- | | Small | Patio or small deck | 100–200 sq ft | $4k | $12k | | Medium | Deck or covered patio | 250–450 sq ft | $11k | $30k | | Large | Multi-level or pergola + patio | 500+ sq ft | $27k | $66k | ## What Affects Deck & Patio Cost in Encino? - Material (concrete vs pavers vs composite deck). - Permit (decks over 30" need one). - Cover or pergola. - Drainage. - Hillside / sloped site. - Encino market premium: local pricing reflects large-lot and hillside homes south of Ventura Blvd, which shifts totals about 20% above the LA County baseline. ## Get exact deck & patio bids in Encino Two or three licensed builders who work in Encino, pricing the same scope. Tell us about your project[or call (818) 482-8365](tel:+18184828365) ## Deck & Patio Sub-Type Comparisons ### Concrete Patio vs Paver Patio Concrete patios are the cheapest hard surface at $14–$20/sq ft but crack; pavers cost $25–$45/sq ft, allow individual repair, and add resale appeal in LA. ### Composite Deck vs Wood Deck Composite (Trex/TimberTech) costs $40–$75/sq ft and is maintenance-free for 25+ years; pressure-treated wood is $28–$45/sq ft but needs re-staining every 2–3 years in LA sun. ## How to Get the Best Price on a Deck & Patio in Encino 1. Get line-itemized bids from two or three builders on the same scope; Encino deck & patio pricing commonly varies 10–25% between contractors. 2. Lock major materials and finishes before signing; mid-project change orders are the #1 cost driver on deck & patio jobs. 3. Bid in shoulder seasons (Jan–Mar or Sep–Oct) when Encino contractor schedules are open and rush premiums disappear. 4. Verify CSLB license, insurance, and bond before paying any deposit. California caps deposits at $1,000 or 10% of contract, whichever is less. ## What is a deck & patio? A deck or patio project builds an outdoor living surface: a raised wood or composite deck, or a ground-level patio of concrete, pavers or stone, often with a cover or pergola. ## How to get an accurate price 1. 1.Write down the scope: size, any layout changes, the finish level, and who supplies fixtures and materials. 2. 2.Get bids from two or three licensed builders who work in Encino, all pricing that same deck & patio scope. 3. 3.Line the bids up item by item. Check allowances, permits, exclusions, and whether overhead and profit are shown. 4. 4.Before any deposit, check each builder's CSLB license and insurance. As of 2026, California caps a home improvement down payment at $1,000 or 10% of the contract, whichever is less, according to the Contractors State License Board. Already have a bid? [Grade it in two minutes](https://keystoneconnect.us/grade-my-bid) or read [how to compare quotes](https://keystoneconnect.us/pillars/how-to-read-compare-contractor-quotes). ## Questions about Deck & Patio in Encino ### How much does a deck & patio cost in Encino, CA? + A deck & patio in Encino costs $4k–$66k, with a typical mid-size deck or patio running $11k–$30k. Per-unit pricing falls in the $34–$78 per sq ft for deck and $14–$48 per sq ft for patio range. ### Do I need a permit for a deck & patio in Encino? + Yes for most scopes — LADBS or the local city building department requires permits any time you move plumbing, gas, electrical, or alter structure. Like-for-like cosmetic refreshes generally don't. ### How long does a deck & patio take in Encino? + Plan for 4–14 weeks of construction in Encino depending on size and complexity, plus 2–8 weeks for design, permits, and material lead times. ## Official sources - [Look up a contractor's license on the CSLB website](https://www.cslb.ca.gov/OnlineServices/CheckLicenseII/CheckLicense.aspx) - [California home improvement contract requirements (Business and Professions Code §7159)](https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?lawCode=BPC§ionNum=7159) - [LADBS: City of Los Angeles building permits](https://www.ladbs.org/) Need more answers? Visit our [contractor FAQ hub](https://keystoneconnect.us/faq). ## Get Matched with Licensed Encino Contractors Tell us about your deck & patio and we'll line up two or three licensed builders who work in the area. Los Angeles County overview [See Deck & Patio costs across all LA County cities →](https://keystoneconnect.us/cost/los-angeles-county/deck-patio) ## Related Encino Projects [All projects← Back to Encino](https://keystoneconnect.us/cities/encino)[EncinoKitchen Remodel Cost →](https://keystoneconnect.us/cities/encino/kitchen-remodel)[EncinoBathroom Remodel Cost →](https://keystoneconnect.us/cities/encino/bathroom-remodel)[EncinoADU Construction Cost →](https://keystoneconnect.us/cities/encino/adu) ## Deck & Patio in Nearby Cities [Sherman Oaks, CADeck & Patio Cost in Sherman Oaks →](https://keystoneconnect.us/cities/sherman-oaks/deck-patio)[Pasadena, CADeck & Patio Cost in Pasadena →](https://keystoneconnect.us/cities/pasadena/deck-patio)[Altadena, CADeck & Patio Cost in Altadena →](https://keystoneconnect.us/cities/altadena/deck-patio)